manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 111 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 111

NetBlazer

99

8

EtherBERT Test Setup and 

Results

The Ether Bit Error Rate Test (BERT) measures the level of transmission 
impairment on a communication channel. Specific test patterns are sent 
through Ethernet frames and then analyzed to detect data integrity 
problem (bit error). 

The EtherBERT test case offers several options:

Traffic configuration:

Ethernet, Ethernet/IPv4/UDP, or Ethernet/IPv6/UDP 

Frame size

Transmit rate

Test pattern

Capability to change dynamically the rate and frame size while the test 
is running.

Injection of impairments on the transmitted traffic (bit errors).

Capability to reset all results/statistics while the test is running.

Errors/Alarms monitoring.

Capability to measure the service disruption time based on no traffic 
received (No Traffic mode).

Global verdict based on bit error count & SDT or bit error rate & SDT.

Capability to configure and view the list of recorded events while a test 
case was running, including threshold crossing events.

Although the NetBlazer has dual ports, it uses single port for 

EtherBERT

 

test. Both unidirectional and bidirectional EtherBERT testing can be 
performed through a single port.

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов