manualshive.com logo in svg

EXFO FTB-5600, Руководство пользователя, Страница: 24 / 146

Поделиться
Скачать
EXFO FTB-5600 Скачать руководство пользователя страница 24

Setting up and Operating your Distributed PMD Analyzer

18

FTB-5600

Cleaning and Connecting Optical Fibers

Cleaning and Connecting Optical Fibers

To connect the fiber-optic cable to the port:
1.

Inspect the fiber using a fiber inspection microscope. If the fiber is 
clean, proceed to connecting it to the port. If the fiber is dirty, clean it as 
explained below.

2.

Clean the fiber ends as follows:

2a.

Gently wipe the fiber end with a lint-free swab dipped in isopropyl 
alcohol.

2b.

Use compressed air to dry completely.

2c.

Visually inspect the fiber end to ensure its cleanliness.

I

MPORTANT

To ensure maximum power and to avoid erroneous readings:

³

Always inspect fiber ends and make sure that they are clean as 
explained below before inserting them into the port. EXFO is 
not responsible for damage or errors caused by bad fiber 
cleaning or handling.

³

Ensure that your patchcord has appropriate connectors. Joining 
mismatched connectors will damage the ferrules.

Содержание FTB-5600



















































































































































Отзывы:

Нет отзывов