EXFO FTB-500 Скачать руководство пользователя страница 284

Страница: 284 / 449

Maintenance

276

FTB-500

Installing or Removing the Power Meter and VFL

To install a power meter:
1.

Turn off your unit.

Disconnect the unit from its external power source and remove the
batteries.

Put on a wrist (or an ankle) antistatic strap and ensure that the end of
its wire is grounded properly.

Place the unit vertically so that its right panel is facing you, and then
locate the protective cover that hides the power meter bay.

Using a screwdriver, remove the three screws of the protective cover.

Note:

Keep the screws close at hand because you will need them to secure the
power meter in place later.

Screws holding the protective
cover in place

Содержание FTB-500


































































































































































































































































































































































































































































Результаты поиска

Содержание FTB-500

Отзывы:

EXFO FTB-500, Руководство пользователя, Страница: 284 / 449

Результаты поиска

Содержание FTB-500

Отзывы: