manualshive.com logo in svg

EXFO FTB-1, Руководство пользователя

Поделиться
Скачать
EXFO FTB-1 Скачать руководство пользователя страница 302

Test Results

290

FTB-700G/800 Series

Alarms/Errors Overview

Alarms/Errors Overview

Current and history alarms/errors are displayed using different 
background colors as defined in the following table. 

Seconds

 gives the total number of seconds in which one or more 

alarm/error occurred. 

Count

 gives the number of occurrences of a specific error. The 

count is displayed using integer value; exponential value (for 
example: 1.00000E10) is used when the count is bigger than the 
field display capacity. 

Rate

 calculates and displays the error rate. The rate is expressed 

using the exponential format with two decimal digits (example: 
1.23E-04). 

Note:

Some Alarms/errors groups display a magnifying icon allowing to see more 
information on alarm/error like Second, Count, and Rate information.

Background 

color

Alarm/ 

Error

Description

Gray

Current

No test result available.

History

Green

Current

No alarm/error has occurred in the last second.

History

No alarm/error has occurred during the test.

Red

Current

An alarm/error occurred in the last second.

History

Amber

History

At least one alarm/error has occurred during the test.

Содержание FTB-1




































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды