Introducing the FPM-300/FLS-300/FOT-300
1
1 Introducing the
FPM-300/FLS-300/FOT-300
This user guide covers the following products (unless otherwise specified,
descriptions apply to all):
FPM-300 Power Meter
FLS-300 Light Source
FOT-300 Optical Loss Test Set: combines both a power meter and a light source
Main Features
FPM
FLS
FOT
Ge or GeX detector with 10 calibrated wavelengths
X
X
Absolute power and link loss measurements
X
X
Editable list of favorite power meter wavelengths
X
X
Editable list of favorite source wavelengths
X
Automatic wavelength detection
X
X
No offset nulling of detectors required in normal operation
X
X
Multiple source configurations on a single port [FOT-300] or
on one or two ports [FLS-300]
X
X
Transmission of editable power value with source’s signal for
automatic reference with compatible power meter
X
X
Transmission of wavelength to compatible power meter in
automatic wavelength or auto-switching mode
X
X
Modulated signal emission or detection (270 Hz, 1 kHz and
2 kHz) compatible with other EXFO units
X
X
X
Automatic shutdown after 10 minutes of idle time (auto-off)
X
X
X
