EXFO FLS-300, Руководство пользователя

Страница: 30 / 40

Maintenance
25
Recalibrating the Unit
Manufacturing and service center calibrations are based on the ISO/IEC 17025
Standard, which states that calibration documents must not contain a
recommended calibration interval, unless this has been previously agreed upon
with the customer.
Validity of specifications depends on operating conditions. For example, the
calibration validity period can be longer or shorter depending on the intensity of use,
environmental conditions and unit maintenance. You should determine the
adequate calibration interval for your unit according to your accuracy requirements.
Under normal use, EXFO recommends calibrating your unit every three years.
Note:
The FlexCare warranty program includes Calibration/Verification
packages (see
Service and Repairs on page 30).
To view the last calibration date (FOT-300 and FPM-300 only):
1.
Hold down
(power meter)
and press at the
same time. The unit displays the main embedded
software version.
2. Press
(power meter)
to display the calibration date
of the power meter.
3. Press to return to normal mode.
Recycling and Disposal (Applies to European
Union Only)
For complete recycling/disposal information as per European Directive WEEE
2002/96/EC, visit the EXFO Web site at
www.exfo.com/recycle .

