EXFO FLS-2600B, Руководство пользователя

Страница: 80 / 157

Remote Control
72
FLS-2600B
Setting the GPIB Primary Address
3. Press ENTER . The Edit marker starts blinking in the lower part of the
display.
4.
Turn the selection dial to enter the setting you wish to work with—
GPIB or RS-232.
5. Press ENTER .
6. To exit the
Setup
menu, press
Setup .
Setting the GPIB Primary Address
To set the GPIB primary address, you must be in GPIB mode. To select the
GPIB mode, see
Setting the FLS-2600B for Remote Control on page 71.
To set the GPIB primary address:
1.
Press
Setup .
2. Turn the selection dial clockwise until DEVICE is displayed. The
current address appears.
3. Press ENTER . The Edit marker starts blinking in the lower part of the
display.
4. Turn the selection dial to enter the address you wish to work with. You
can select a number between 1 and 30.
5. Press ENTER .
To exit the
Setup
menu, press
Setup .
Edit