EXFO FIP-500 Скачать руководство пользователя страница 15

Страница: 15 / 131

Introducing the FIP-500 Fiber Inspection Scope

Fiber Inspection Scope

LED Indicators Description

LED Indicators Description

Your unit is equipped with a battery LED and a dual-function LED.

Battery LED

The battery LED, located next to the power button, on the side of your unit,
provides you with information about the battery status.

The table below indicates the possible statuses.

Unit

Status

Meaning

Connected to an

external power

source

Off

The external power source does not

provide sufficient power to charge the

battery.

Blue

The battery is fully charged.

Blue, blinking – slow

blinking

The battery is charging.

Blue, blinking – fast blinking The battery charge has been

interrupted, possibly because the unit

may not be within the recommended

charging temperatures. For more

information, see

Equipment Ratings

page 15.

Red, fast blinking

Charge or temperature error.

Red, steady for 5 seconds

The battery level is too low to start the

unit.

White

The unit is starting up.

Not connected to

an external

power source

Off

The unit is not connected to an external

power source.

Red, steady for 5 seconds

The unit is off and the battery level is

too low to start the unit.

White

The unit is starting up.

Содержание FIP-500




































































































































Результаты поиска

Содержание FIP-500

Отзывы:

EXFO FIP-500, Руководство пользователя, Страница: 15 / 131

Результаты поиска

Содержание FIP-500

Отзывы: