24
Maintenance
w w w . t e c n a r e . c o m
T SERIES | rev.:1.1
TANIT
5. Inspection, Maintenance and Repair work
This section illustrates the steps to follow when removing the TANIT Series loudspeaker components. To
replace the components and reassemble the loudspeaker, reverse these instructions.
TOOLS:
• Torque Screwdriver
• Pack hex bit spherical head keys
• Pack screwdrivers
• Level
5.1. TANIT
Procedure:
Place protective material between the enclosure and the surface to avoid scratching the fins
5.1.1.
Accessing to the woofer chamber
• Remove the grille and grille foam using a 3 mm allen wrench. During the removal, hold the grille and
grille foam in place. This prevents the grille foam from tearing
Fig. 16 Accesign to the woofer chamber
5.1.2.
Removing the woofer
• Gradually, remove the 4 woofer mounting screws with a Philips screwdriver, following a star pattern.
Do not discard the mounting hardware
• Lift the woofer enough to get access and disconnect the two electrical leads
• Lift the woofer from the cabinet
CAUTION:
Any maintenance and/or repair work on the product must be carried out by
qualified staff.
