Excera EP3620 U1, Руководство пользователя

Страница: 25 / 34

39 38
FUNCTION MENU SETUP
Deleting All Text Messages from the Inbox
Privacy
Procedure:
1. Press [
MENU
] to access menu.
2. Press [ /
]
to Messages and press [
MENU
] to select.
3. Press [ /
]
to Inbox and press [
MENU
] to select.
4. Press [ /
]
to Delete All and press [
MENU
] to select.
5. At Delete Message? Press [ /
]
to Yes and press [
MENU
] to select.
6. The Display shows Inbox Cleared. When you select the Inbox and it contains no text messages,
the display shows List Empty.
If enabled, this feature helps to prevent eavesdropping by unauthorized users on a channel by the
use of a software based scrambling solution.
Your radio must have privacy enabled on the channel to send a privacy-enabled transmission .
To unscramble a privacy-enabled call or data transmission, your radio must
have the same Privacy Key (for Basic Privacy), the same key value and key ID (for Enhanced
Privacy) as the transmitting radio.
If your radio receives a scrambled call that is of a different Privacy Key, you will either hear a
garbled transmission.
You can preset at most 16 privacy groups , privacy key ( 4 Bytes ), press the
privacy button to turn on/off scramble .
If the radio with privacy type, the main display shows scramble or none scramble icon.
FUNCTION MENU SETUP
NOTE: Performing Radio Disable and Enable is limited to radios with these functions enabled.
Dual Tone Multi Frequency (DTMF) (Analog)
Disable/ Enable
Radio Disable
The Dual Tone Multi Frequency (DTMF) have four received/transmit systems, you can set 32 groups
encode, every group with 30 characters.
The called party: the called party can set below decode respond by software:
Disable: When the radio receives disable code, then the radio is forbidden to receive
/transmit.
Enable: In disable state the radio receives an enable code and back to normal.
You can enable or disable any radio in the system. For example, you might want to disable a stolen
radio, to prevent the thief from using it, and enable that radio, when it is recovered.
Procedure:
1. Press [
MENU
] to access menu.
2. Press [ /
]
to Contacts and press [
MENU
] to select.
3. Press [ /
]
to the required alias or ID and press [
MENU
] to select. Or press [ /
]
to
Manual Dial and press [
MENU
] twice to select. Input the subscriber alias or ID and press [
MENU
] .
4. Press [ /
]
to Radio Disable and press [
MENU
] to select.
Call 1
Radio Disable: