Excera EP3620 U1, Руководство пользователя

Страница: 14 / 34

17 16
BASIC OPERATIONS
4.Receiving and Responding to a Private Call
1. The green LED turns on.
2.
The first line of the display shows the subscriber alias or ID, and the RSSI icon. The second line
displays Private Call and the Private Call icon.
3. Press the [PTT] button to respond to the call , and the red LED turns on.
4. Release the [PTT] button to listen.
5. If there is no voice activity for a predetermined period of time, the call ends.
A Private call is a call from an individual radio to another individual radio.There are two types of
Private Calls. The first type is where a radio presence check is performed prior to setting up the call.
The other type sets up the call immediately.
Procedure:
NOTE: The radio stops receiving the All Call if you switch to a different channel while receiving the
call.
BASIC OPERATIONS
5.Receiving an All Call
6.Making a Radio Call
1.Making a Group Call
1. The green LED turns on.
2. The first line of the display shows the caller alias or ID, and the RSSI icon. The second line
displays All Call and the All Call icon.
An All Call is a call from an individual radio to every radio on the channel. It is used to make
important announcements requiring the user's full attention.
Procedure:
When you receive an All Call:
You can select a channel, subscriber ID, or group by using:
● The Channel Selector Knob
● One Touch Call button
● The Contacts list
● Manual Dial ( via Contacts)--This method is for Private Calls only and is dialled using the keypad.
Making a Call by the Channel Selector Knob
group alias and the Group Call icon (in digital mode only).
3. Press the [PTT] button to respond to the call and the red LED turns on.
4. Release the [PTT] button to listen.
5. If there is no voice activity for a predetermined period of time
, the call ends.
To make a call to a group of users, your radio must be configured as member of that group.
Procedure:
1. Turn the Channel Selector Knob to select the channel with the active group alias or ID.
2. Press the [PTT] button to make the call. The green LED turns on when the target radio responds.
The display shows the group call icon, the group alias or ID and transmitting radio alias or ID.