www.excelsecu.com
5.2.1.
Bluetooth Pairing Mode (First Time Only)
1.
Long touch metal edge of the sensor for 5 seconds to enter the Bluetooth pairing mode
for the first time. The indicator light is steady blue. If there is no pairing request received
in 60 seconds, the indicator light goes out and the FIDO2 Pro+ Fingerprint Key exits
Bluetooth pairing mode.
2.
Scan Bluetooth devices on your client side (e.g. a smart phone). Connect to the device
which has the same SN as printed on the back of the FIDO2 Pro+ Fingerprint Key.
3.
Input 6-digits PIN as printed on the back of the FIDO2 Pro+ Fingerprint Key. When paired
successfully, the blue light should start blinking.
4.
When an authentication request is received, the light blinks red, place the finger on
sensor to verity to complete the authentication.
5.2.2.
Bluetooth Mode (Paired Before)
1.
Touch metal edge of the sensor to enter the Bluetooth pairing mode. The indicator light
blinks blue.
2.
When an authentication request is received, the light blinks red, place the finger on
sensor to verity to complete the authentication.
For security purpose, the FIDO2 Pro+ Fingerprint Key will be forced to shut down after 30 seconds.
For security purpose, the FIDO2 Pro+ Fingerprint Key will be forced to shut down after 30 seconds.