3
X-Cite
®
Optical Power Measurement System User Guide
035-00390R rev. 3
2.2 Safety Precautions
Caution
Never look into the light emitting end of the light guide. The light could severely
damage the cornea and retina of the eye if the light is observed directly. UV
protective eye shielding must be used at all times as well as clothing to protect
exposed skin.
Warning
Always make sure the light guide is properly inserted into the XR2100 and/or the
microscope prior to working with the system. This will minimize the risk of exposure
to the UV light.
Caution!
To prevent damage/ degradation of the attached XP750 Sensor Cable, always
allow adequate clearance to prevent kinking or excessive bending.
Warning
Should this X-Cite
®
Optical Power Measurement System be used in a manner not
specified by Excelitas Technologies, the protection provided by the equipment may
be impaired.
Warning
The XR2100 is supplied with two lithium batteries. Lithium batteries present a
potential fire, explosion or severe burn hazard.
DO NOT
attempt to re-charge,
disassemble, incinerate, short circuit or expose battery to temperatures above 100°
C or expose contents to water.
WARNING!
Used batteries are not to be discarded. Return to the nearest authorized
Lithium batteries must have terminals taped with non-conductive material prior to
returning for disposal/re-cycling to prevent short-circuiting. External packaging
material must provide adequate protection to contents.
The lithium battery supplied in XR2100 DOES NOT contain: mercury, lead,
manganese or cadmium. Substitution of any other type of battery is not
recommended and may void warranty.
Caution, hot surface
In instances where high power light sources are measured for extended periods of
time, the light guide adaptors supplied with the XR2100 may become hot! Always
use caution when handling these adaptors.
