35
X-Cite
®
Optical Power Measurement System User Guide
035-00390R rev. 3
13 Regulatory Compliance
Product Safety and Electromagnetic Compatibility
The X-Cite XR2100 / XP750 have been tested and found to comply with product safety
and electromagnetic compatibility requirements. For a complete list of tests and for
certification details, please contact your X-Cite representative or visit
http://www.excelitas.com/Pages/Product/X-Cite-XR2100-Optical-Power-Meter.aspx
CE Marking
Council Directive 2014/35/EU
Low Voltage Directive
Council Directive 2014/30/ECU
EMC Directive
Council Directive 2012/19/EU
WEEE Directive
Council Directive 2011/65/EU
RoHS
Council Directive 2006/66/EEC
Battery Directive
FCC Class B Digital Device or Peripheral
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and then the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by Excelitas Technologies could void
the user’s authority to operate the equipment.