20
X-Cite® mini+ User Guide
035-00587R rev. 5
Click will clear alarm, unless unsafe to ignore
Temperature
Indicates system temperature status
Yellow = warning, LED temp above normal
Red = LED off, temp is too high
Calibration
Not applicable for X-Cite® mini+
LED Hours
Indicates hours logged on LED
Green = <20K hours, yellow = >20K hours, red = >40K hours
Light Guide
Not applicable for X-Cite® mini+
Shutter
Click to turn LED on/off
Intensity
Left mouse click = increase by 1% increment.
Right mouse click = decrease by 1% increment.
Left double click = opens dialog box type in value
Closed-Loop
Feedback
Not applicable for X-Cite® mini+
Lock/unlock
Lock/unlock speedDIAL control
Green = speedDIAL is locked
Grey = speedDIAL is unlocked
Lamp
Not applicable for X-Cite® mini+
5.1.6
Commercial Software Support
a.
X-Cite® mini+ can be controlled through many commercially available packages. Where
X-Cite® mini+ specific control may not be available, basic functionality can be achieved
using X-Cite® 120PC or X-Cite® exacte hardware drivers. For an updated list of software
packages that support X-Cite® products, see
https://www.excelitas.com/product/x-cite-
mini-compact-led-illumination-system
b.
For commercial software packages, if requested specify the serial port parameters as:
19,200 baud, no parity, 8 data bits and 1 stop bit.
c.
When controlling X-Cite® mini+, some commercial software packages may block manual
input from speedDIAL. The lock icon will appear on the speedDIAL display in these
cases.
5.1.7
Software Developer’s Kit (SDK)
The command list for X-Cite® mini+ is available by request. To obtain the latest update, please
contact Excelitas Technologies.
