indicated on the device matches the voltage on the
local supply network and if the socket is fitted with a
differential circuit breaker. In case of non-compliance,
the device could be damaged and the user might be
injured.
When a storm is announced or the unit must not be used
for an long time, unplug it to reduce the risk of electric
shock or fire.
CARE
- Unplug the unit when cleaning it and during all
maintenance operations.
- Do not use cleaning product: use a dry cloth and rub
gently.
SAFE INSTRUCTIONS
Proper use
This unit is designed to drive a DMX LED lamp. Use the
device only in its intended use as described in this
manual. Any other use, as well as use in other conditions,
will be considered non-compliant and can cause injury
and damage. No liability will be assumed for damages
resulting from improper use.
The device should only be used by people in full
possession of their physical, sensory and mental abilities
who must have the knowledge and experience required.
Any other people is only allowed to use the device under
the supervision or direction of a person responsible for
its safety.
Safety
Risk of electric shock
This lighting system requires high voltage, which can
result in an electrical shock. Never remove covers.
The parts inside the device are maintenance free.
Dangers for children
Ensure a proper disposal of plastic envelopes and
packaging. They should not be near babies nor young
children: suffocation danger. Make sure that children do
not remove small parts of the unit (e.g. knobs, screws or
similar). Children could swallow the pieces and choke.
Never leave unattended children use electrical devices.
Electric shock caused by a short circuit
Do not modify the power cord nor the plug. In case of
non-compliance, there is a risk of electric shock and
fire hazard and death. If in doubt, contact a certified
technician.
Eye injuries due to a high light intensity
Do not look at the beam light directly to avoid any visual
problems.
Risk of fire
Never cover the device nor its ventilation slots. Do not
install the device close to a source of heat. Keep the
device away from flames.
The device can get very hot during operation. Keep the
device away from flamable metrials.
Terms of use
The device is designed for indoor use. To prevent
damage, do not expose the product to liquid or moisture.
Avoid direct sunlight, clogging and strong vibrations.
Power supply
Check the operation of the power supply before
connecting to the system.
Before connecting the appliance, check if the voltage
(continuation of CRMX)
In order to get the best wireless connection, it is
recommended to take into account the following
guidelines:
• Always align the orientation of the CRMX transmitter
with the
EXORAA
antenna. In case the antenna of
the projector is vertical, make sure to set the antenna
of the transmitter vertically.
• Keep all metalic objects away as much as possible,
to prevent interferences.
• Keep the line of sight between transmitter and
projector as clear as possible.
• Do not use the CRMX in areas with high
electromagnetic pertubations.
DIMMING CURVE
A long press (>5 seconds) on the central encoder allows
to modify the dimming curve of the projector.
Cus.
= "Custom", dimming optimized for AR111
Lin.
= "Linear", linear dimming curve
Press for 1 second to validate.
RESET
To reset the projector to factory settings:
1- Set the fixture to Manual mode
2- Hold down the central encoder for more than 10
seconds until the flashing message "_._._._." is displayed.
Then release the encoder. The fixture will then restart with
the factory settings.
Factory settings: @DMX001 / "Custom" dimming
Important:
Note that for CRMX versions, the RESET does
not unpair the fixture from its transmitter.
To unpair a CRMX fixture, it is necessary to set the fixture
in CRMX mode and then hold the UNLINK button for 3
seconds until the CRMX LEDs turn off.
EXALUX is a registered trademark of the
French tech company LEDIXIS
1 rue de la Noë - Bat. IM3
CS 12111 | 44322 Nantes cedex 3 | FRANCE
+33 (0)9.72.45.70.43
www.exalux.eu
Information :
Technical support :
EXORAA
Last update 07/2021
