Manual EVO-LINK-200 series
Version 1.2
20.01.2022
Page
24
of
31
6. Adjustment options
6.1 Rough adjustment
By loosening the handle, one can adjust the EVO-Link-200 series freely, in the
pitch and/or roll directions, with an angle of ± 25 degrees. Also, the entire set-up
can be rotated 360 degrees around the Z axis.
When the desired position is reached, please tighten the handle hand-tight to
keep the set-up in that position. If there is need to tighten the handle more, it is
possible to lift the handle a little bit and turn it counter clock wise. After this
lower the handle and tighten it again hand-tight. To ensure a maximum torque
of 10 Nm, the 13mm nut inside the handle can be used.
WARNING: Tighten the handle with a maximum torque of 10 Nm to
guarantee a proper and safe fastening.
