Manual EVO-LINK-200 series
Version 1.2
20.01.2022
Page
21
of
31
5.3 Mounting the EVO-LINK-210 or EVO-LINK-211 to a truss
The two self-lock hook clamps on the EVO-LINK-210 and EVO-LINK-211 cross
beam can be adjusted in a range of 124 mm (4,88 in). The distance between the
clamps can vary between 236mm and 360mm. For moving a clamp please
unscrew the M12 safety nut with the 19mm hexagonal wrench key and move the
clamps to the desired position.
Afterwards secure the M12 Safety nut with a
torque of 85Nm +/-0,5 Nm.
Step 1:
Carefully move the truss mount with the frame attached towards the
truss. Please make sure that both self-lock hook clamps are open enough so they
will fit easily on the truss.
360 mm / 14,17
in
236 mm / 9,29 in
