24
P
RODUCT
M
ANUAL
1010964
Chapter
3
C
ONFIGURING
THE
A
UTOLOADER
S
ETTING
THE
E
MULATION
M
ODE
If your software has not yet been certified for the AutoPak
1x7
or Exabyte EZ17
autoloader, you can select an option that allows the autoloader to emulate an
Exabyte 210 library. Changing the emulation mode causes the autoloader to
return “EXB-210” in response to a SCSI INQUIRY command from an
application. Because most applications are certified for the Exabyte 210 library,
changing the emulation mode allows these applications to support the
AutoPak
1x7
.
To set the autoloader to Exabyte 210 emulation mode:
1.
1.
1.
1.
Press
[MENU]
. The following screen appears:
2.
2.
2.
2.
Disable LCD security, as described on
, if it is enabled.
3.
3.
3.
3.
Press
[
3
]
or
[
4
]
to scroll through the Main Menu until you see the following
screen:
The “
E
” indicates whether 210 emulation is on (1) or off (0).
4.
4.
4.
4.
If you want to change the 210 emulation setting, press
[ENTER]
to view the
options in the SCSI Menu. Press
[
3
]
or
[
4
]
until the following screen appears:
5.
5.
5.
5.
Press
[ENTER]
to view the emulation options. The following screen appears
(
n
is either 0 or 1):
6.
6.
6.
6.
Press
[
3
]
or
[
4
]
until you see the setting you want. If you want 210
emulation on, press
[ENTER]
when the LCD displays
1
. If you want 210
emulation off, press
[ENTER]
when the LCD displays
0
.
!
S e c u r t y
D i s a b l e d
!
S C S I
D 0 1 A 0 0 E 1
!
E m u l a t e
2 1 0 :
1
E m u l a t e
2 1 0 ?
n
↑