Exabyte 221L, Руководство по эксплуатации продукта

Страница: 97 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 81
V
IEWING THE
C
ARTRIDGE
I
NVENTORY
V
IEWING THE
C
ARTRIDGE
I
NVENTORY
The Cartridge Inventory screens allow you to view information the library
maintains for each element. Elements are physical locations in the library that
can accept a cartridge (the magazine slots, the fixed slots, the tape drives, the
entry/exit port, and the robot). Information maintained in the inventory
includes whether an element contains a cartridge, bar code label information
for the cartridge, the exact location of an element, and how many positioning
retries have occurred at an element. The library uses this information to
process commands from the library software. Viewing cartridge inventory
information can aid in troubleshooting library problems.
To view the cartridge inventory:
1.
1. 1.
1. Press
[MENU]
to display the menus. The Cartridge Inventory screen appears.
2. 2. 2. 2. Press
[ENTER]
to display the first inventory information screen. Press the
down arrow key to display additional screens.
There are three screens that provide inventory information. The first screen
depicts information about the slots in the right-side magazine (M 1 through
7), for Drives 1 and 2 (D 1 and 2), and for the entry/exit port (E).
The second screen is for the left-side magazine (L1 through 7) and the robot
(R).
The third screen is for the fixed cartridge slots (F1 through 7), as shown
below.
The second line of the cartridge inventory screens can contain the following
information:
A bar (
❚
) under the element number indicates that a cartridge is stored
in that element.
C a r t r i d g e
I n v e n t o r y
M 1 2 3 4 5 6 7 D 1 2 E
↕
❚ ❚ ❚ ❚ ❚ ❚ ❚
L 1 2 3 4 5 6 7 R
↕
❚ ❚ ❚ ❚ ❚ ❚ ❚
F 1 2 3 4 5 6 7
↕
❚ ❚ ❚ ❚ ❚ ❚ ❚