Exabyte 221L, Руководство по эксплуатации продукта

Страница: 59 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 43
S
ETTING
C
ONFIGURATION
O
PTIONS
C
HANGING THE
E
MULATION
M
ODE
If your library software has not yet been certified for the Exabyte 221L or
221L-FC library, you can select an option that allows the library to emulate an
Exabyte 210, 430, or 480 library. By default, the library returns “Exabyte 221L”
in response to a SCSI INQUIRY command from an application. Changing the
emulation mode causes the library to return “EXB-210,” “EXB-480,“or “Exabyte
430” instead. Because most library applications are certified for these libraries,
changing the emulation mode may allow these applications to support the
221L and 221L-FC.
To change the emulation mode:
1. 1. 1. 1. If the security option has been enabled, disable it (see page 50 ).
2. 2. 2. 2. Press
[MENU]
to display the menus (or return to the top of the menu
selections). Press the down arrow key until “SCSI Menu” (221L) or “Fibre
Menu” (221L-FC) appears, then press
[ENTER]
.
3. 3. 3. 3. Press the down arrow key until “Emulation Mode” appears, as shown
below. This screen shows the current mode.
4. 4. 4. 4. Press
[ENTER]
. The following screen appears.
5.
5. 5.
5. Use the up or down arrow key to select an emulation mode, then press
[ENTER]
. Select “EXB-210” if your software supports the Exabyte 210 library;
select “EXB-480” if your software supports the Exabyte 480 library; select
“Exabyte 430” if your software supports the Exabyte 430.
! ! ! !
Important
If you change the emulation mode, you will need to reboot your
host computer so that it recognizes the new emulation mode.
E m u l a t i o n M o d e :
N o n e
E m u l a t i o n M o d e ?
N o n e
↕