Exabyte 221L, Руководство по эксплуатации продукта

Страница: 56 / 208

40
P
RODUCT
M
ANUAL
1014258
C
HAPTER
3—C
ONFIGURING THE
L
IBRARY
5.
5. 5.
5. At each screen, press
[ENTER]
to display another screen for setting values. To
change addresses, use the left and right arrow keys to move the screen
arrow (
↕
) across columns until it is under a digit you want to change. Use
the up and down arrow keys to scroll through values. When you have
finished changing all of the desired values, press
[ENTER]
to save your
changes.
Viewing the SNMP Settings, FTP User Name, and FTP Password
The Ethernet Security screens allow you to view the read-only values for the
library’s Read, Write, and Broadcast community access strings. You can also
view and change the library’s FTP user name and password.
To view the Ethernet security screens:
1. 1. 1. 1. If the security option has been enabled, disable it (see page 50 ).
2. 2. 2. 2. Press
[MENU]
to display the menus. Press the down arrow key until “Ethernet
Menu” appears.
3. 3. 3. 3. Press
[ENTER]
. The Ethernet Configuration menu appears.
4.
4. 4.
4. Press the down arrow key until “Ethernet Security” appears.
Subnet Mask Sets the subnet mask for the library.
Note: This option displays “N/A” if the network address is set to DHCP.
Gateway Address Sets the default TCP/IP (Transmission Control Protocol/Internet Protocol) gateway
address for the library.
Note: This option displays “N/A” if the network address is set to DHCP.
Table 3-5 Ethernet address configuration options (continued)
Ethernet Address
Option
Description
E t h e r n e t M e n u
S 0 . 0 . 0 . 1
E t h e r n e t
C o n f i g u r a t i o n
E t h e r n e t
S e c u r i t y