Exabyte 221L, Руководство по эксплуатации продукта

Страница: 111 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 95
S
ETTING
C
ONFIGURATION
O
PTIONS
5.
5. 5.
5. If necessary, enter the remote manager password (see page 105 ).
6.
6. 6.
6. Enter a new value for the Gateway address, as desired.
7.
7. 7.
7. Click on the radio button for Dynamic or Static addressing.
8.
8. 8.
8. If you selected Static addressing, enter values for the IP address and Subnet
mask, as desired.
9. 9. 9. 9. Click on the Change button. The changes take effect.
Setting the SNMP Trap Recipient Address To set the SNMP trap recipient
address:
1. 1. 1. 1. Click on Configure at the top of the page.
2. 2. 2. 2. Click on Configure the interfaces.
3. 3. 3. 3. Click on Configure the network interface.
Figure 6-6 Remote management utility – Network Interface Configuration page