
EX3003 inner rails
Rail assembly
WARNING
Do not pick up the server with the front handles. They are designed to pull the system from a rack
only.
2.2. Install the Inner Rails
To install the inner rails, you must release the rails then install the rail extension along with the inner
rails.
2.2.1. RELEASE THE INNER RAILS
Each inner rail has a locking latch. This latch prevents the server from coming completely out of the rack
when the chassis is pulled out for servicing.
To mount the rail onto the chassis, first release the inner rail from the outer rails:
1. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
2. Press the locking tab down to release the inner rail.
Rack Mounting Instructions
Exabeam Appliance Setup Guide - Version SMP 2019
Published Mar 15, 2021
7