exabeam EX2003 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 20

exabeam EX2003 Скачать руководство пользователя страница 6

2. Rack Mounting Instructions

Follow the rack mounting instructions to install the Exabeam appliance chassis into a rack unit.

This section provides information on installing the Exabeam appliance chassis into a rack unit with the

rails provided. There are a variety of rack units on the market, which may mean the assembly procedure

will differ slightly. Please also refer to the installation instructions that came with the rack unit you are

using.

NOTE

EX2003 and EX4003 are 1U rack units. The rail fits a rack between 26" and 33.5" deep.

EX3000 is a 2U rack unit. The rail fits a rack between 26.5" and 36.4" deep

2.1. Identify the Sections of the Rack Rails

The rack rails must be properly identified in order to assemble them in the correct order.

The chassis package includes two rack rail assemblies in the rack mounting kit. Each assembly consists

of three sections:

• an inner fixed chassis rail that secures directly to the server chassis.

NOTE

For EX2003 and EX4003, the inner rails are pre-installed on the chassis.

• an outer fixed rack rail that secures directly to the rack itself.
• a middle rail which extends from the outer rail.

EX2003 and EX4003 inner rails

Rack Mounting Instructions

Exabeam Appliance Setup Guide - Version SMP 2019

Published Mar 15, 2021

6

«
...
4
5
6
7
8
...
»

Содержание EX2003





















Отзывы:

Нет отзывов