Design and function
Mounting the machine
099-008639-EW501
28.04.2022
21
5.2.3 Final assembly
WARNING
Danger due to failure to carry out the final inspection!
Parts that are incorrectly fitted or that become loose are a source of danger.
• Check all mechanical connections to ensure that they are fitted correctly!
• Carry out the final inspection!
• Carry out the functional test!
5.3 Mounting the machine
CAUTION
Improperly fastened machines!
Devices, device combinations and accessories that are not properly fastened to
transport systems may tip over during transport and cause injury.
• Use the systems only for transporting the machines specified in
> see 3 chapter
.
• Secure the machines in the middle or at the specified attachment points on the machine
carrier.
• Use only the original parts supplied to fasten the machines.
• Check the attachment points before each transport and at regular intervals.
This transport system is designed to accommodate modular device systems. By attaching addi-
tional options, up to two system components (e.g., power source and cooling module or an identi-
cal module
> see 5.1 chapter
) can be mounted on the transport cart (see the relevant conversion
instructions).
5.4 Transport and installation
WARNING
Risk of accident due to improper transport of machines that must not be lifted!
Do not lift or suspend the machine! The machine can drop and cause injuries! The han-
dles, straps or brackets are suitable for transport by hand only!
• The machine must not be suspended or lifted using a crane.
CAUTION
Risk of accident from improperly attached machines!
Depending on the machine series, the transport cart for fas-
tening the machines must be adapted. If the transport cart is
not adapted, the transported machine may tip over and injure
people!
• After a modification and before each transport, check that all
fastenings are secure!
