Functional characteristics
MIG/MAG welding
099-5TLPXQ-EW501
29.01.2021
29
5.2.5.2 Arc length
When required, the arc length (welding voltage) can be adjusted for the welding task in hand by +/– 9.9 V.
Figure 5-10
5.2.5.3 Arc dynamics (choke effect)
This function can be used to adjust the arc between a narrow, hard arc with deep penetration (positive
values) and a wide and soft arc (negative values). In addition, the selected settings are displayed with
signal lights below the rotary knobs.
Figure 5-11
5.2.6 Copy JOB (welding task)
7s
3s
Figure 5-12
