Functional characteristics
Wire return
099-0M37XS-EW501
31.8.2022
23
5.3 Wire return
The wire return function is used to retract the wire electrode without tension and protection gas. By simul-
taneously pressing and holding the wire inching and gas test buttons, the wire return speed increases in a
ramp function (special parameter P1
> see 5.8.2 chapter
) from 1 m/min to the set maximum value. The
maximum value is set by simultaneously pressing the wire inching button and turning the left click wheel.
During the process, the wire spool must be turned by hand clockwise to wind up the wire electrode again.
The operating elements are installed under the protective cap of wire feed mechanism.
+
Figure 5-4
