Design and function
Definition of MIG/MAG welding tasks
54
099-005366-EW501
31.07.2014
Operating
element
Action
Result
Display
n x
Select "Dynamics"
Setting from -40 to +40.
Control voltage operation
This parameter setting is specified by the robot control via the RINTX12 or BUSINTX11 robot interface
(see documentation in the relevant interface description).
Signal light "PROG 0" lights up on control panel.
5.16.5.2 Program sequence
Certain materials, such as aluminium, require special functions in order to be able to weld them safely
and at high quality. The non-latched special operating mode is used here with the following programs:
Figure 5-20
The following parameters can be selected and changed on the control panel:
Graphic
Symbol
Parameter
Value
Gas pre-flows
0.0 to 20.0 sec
Ignition program
•
Wire speed
•
Voltage correction
WFstart 0 % to 200 % or
Ustart -9.9 V to +9.9 V
Change with button
Start time
0.0 to 20.0 sec
Program number
P0 to P15
End program
•
Wire speed
•
Voltage correction
WFend 0 % to 200 % or
Uend -9.9 V to +9.9 V
Change with button
End time
0.0 to 20.0 sec
Wire burn-back
2 to 500
Gas post-flow time
0.0 to 20.0 sec
Parameter changes are made either using the "Welding parameter
" rotary dial or the
buttons.
The program P
A
corresponds to one of the up to 15 freely definable programs. The times for parameters
tS1 and tSe (soft wire transfer) are factory-set.
The complete list of parameters can be found in chapter:
MIG/MAG program sequence ("Program steps" mode).
The signal lights display the current progress in the function sequence throughout the welding process.
Содержание alpha Q 352 puls MM
