8
PR
ODUCT ASSEMBL
Y
Improper handling of the product may cause
injury.
• Do not connect the product to a mains socket until it
is fully assembled
• Do not operate the product without the handle being
firmly screwed into place
1. Set the product in an upright position
2. Place the handle (1) firmly onto the main body of the
product (see below). Make sure that the cord clip
(13) is on the same side as the cord hooks (14)
3. Using a Phillips head screwdriver, drive one screw
(18) into each side of the handle and fasten them
securely (see diagram)
Do not overtighten the screws, as this could strip the
screw holes
18
1
CARPET PREPARATION
Risk of Damage!
• Using the product as a dry vacuum will damage it
• Only use the product with an appropriate carpet cleaning solution
1. Remove as much furniture as possible. Place plastic or other protective covering
under and around any furniture left in the room
2. Thoroughly vacuum the carpet to be cleaned with a regular vacuum cleaner
3. Dampen a white cloth with the carpet cleaning solution you intend to use
4. Rub the cloth gently over a small test area on the carpet and check for any colour
bleeding. If the cloth remains clean, it should be safe to clean the carpet
