17
EVM Solutions (Pty) Ltd 210 Main Street, Somerset West, Western Cape, South Africa, 7130
Support : 07 28 42 42 82
www.evx.co.za
Document Number: 200-2022-301-3
Mount
the
e
‐
Scooter
Sit down on the seat with both feet on the ground. Release the side stand or take the e-Scooter
of the main central stand by pushing it to the front while holding the handlebar.
Grip the Left Handlebar securely and hold the brake with your left hand.
Switch
the
e
‐
Scooter
on.
Turn the key clockwise to switch the e-Scooter on. The LCD main display will light up.
Put
the
e
‐
Scooter
in
Drive
mode.
The LCD will always be in PARK mode when the e-Scooter is switched on– indicated with a P
on the display shown in Figure 11a. To start driving, the e-Scooter needs to be switched to
Drive Mode by pressing the “P” button (see Figure 11b) and holding it in for a few seconds. The
“P” on the LCD screen will be replaced by “00” as shown in Figure 11c, the word “READY “will
be displayed.
Caution:
If the Throttle is rotated the e-Scooter will start moving. ( If the side stand is retracted)
Fig
11a
Fig
11b
Fig
11c
Figure
11
:
Park
mode
and
switching
to
drive
mode
To
start
driving.
The e-Scooter is now in READY mode and will
start
moving
if
the
Throttle
is
rotated
.
Be careful not to rotate the Throttle if you are not ready to start driving.
5. DRIVING
