Installation Manual MK-Series
2/10
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications to this device void the warranty.
High Definition Demonstration Camera Positioning System
Please contact ELR for technical assistance: [email protected] | +31 0 85 0441855 (NL).
This item was thoroughly tested and carefully packed at the factory prior to shipping. Upon
acceptance by the carrier, the carrier assumes responsibility for the item’s safe arrival. If you
receive the item in a damaged condition, apparent or concealed, a claim for damage must be made
to the carrier.
If a visual inspection shows damage upon receipt of this shipment, it must be noted on the freight
bill or express receipt and the notation signed by the carrier’s agent. Failure to do this can result
in the carrier refusing to honor the claim. When the damage is not apparent until the unit is
unpacked, a claim for concealed damage must be made.
Make a mail or phone request to the carrier for inspection immediately upon discovery of the
concealed damage. Keep all cartons and packing materials.
To return the product to the factory for service, please contact ELR for a Return Material
Authorization (RMA) Number.
Prominently display the RMA number on the outside of the shipping container(s) and on
paperwork contained inside. Give a brief description of why the equipment is being returned and
list the symptoms of any problems being experienced with the equipment.
