EVSEDO-AC011K-AE-25
Page | 14
2021© IPC2U GmbH. All rights reserved
01.01.001.2021/09-en
4.4.
Stopping/restarting charging
Charging can be interrupted at any time.
•
Scan the RFID card near status indicator light on the front panel, for stopping
charging process
•
The indicator light turns yellow.
•
Charging stops. The cable can then be unplugged. To restart charging, Scan the
RFID card again. The indicator light will blink green again.
•
Unplug the charging cable.
•
The indicator light turns green (standby status).
•
Place the charging cable connector into holder on the front panel.
•
Wind the cable around the charging station. The charging cable connector should
be placed into holder on the front panel.
4.5.
Stopping charging automatically
•
Once the battery is charged, charging stops automatically.
•
Unplug the charging cable.
•
Wind the cable around the charging station. The charging cable connector should
be placed into holder on the front panel.
