State of the Art EVSE
User Manual
Model 3727-A02XX EVSE Gateway
Copyright EVSE LLC 2017. All rights reserved. Patents pending.
Page 25
System Configuration
To display the System Configuration screen, click File and select Sys Config View from the dropdown list.
The System Configuration screen provides setup information for the Gateway Module, allowing you to configure options such
as:
Username used to access the web console
Password used to access the web console
Version - refers to the system currently installed
ZigBee PAN ID – Network ID that is assigned to all radios in the network during ZigBee Mesh Network setup.
SetPANID button – configures the USB ZigBee radio to use the preset PAN ID (used if replacing the USB ZigBee
radio)
Query ZigBees button – sends a query to all EVSE radios to retrieve system status
Test ZiBee – Queries ZigBee to make sure communication is working properly
Days to keep local messages – retention period for status events
Days to keep charge history – retention period for charge history
MQ URL - tcp://localhost:61616 – specifies the connection information for the Payment Module messaging
interface.
Note: This value should not be modified unless directed to do so by Customer Support personnel.
MQ Test – Tests Message Queue operations
Post Office Test – Tests the message sorting portion to make sure it’s working properly
Reservation Info – Enables/disables being able to reserve EVSEs over OCPP Web Services
Reset Gateway – Resets the Gateway Module
White List Badge Format – Specifies the format to use for White List Badges; for both manual entry and OCPP
transactions
Cable Management – Sends a Charge Stop message to an ESVE who’s dropped cable has not started charging after
a specified time
Enter your changes and click Save Changes. You can also change your time zone via the Time Zone tab and your network
settings via the Network settings tab. Only qualified Admin should edit network settings.
