5.8.
Video-Proc
Setting
Description
Y_Gain
Y-Gain controls the Yellow gain. The control range is between 0% and 200%. The
default setting is 100%.
C_Gain
C-Gain controls the Cyan gain. The control range is between 50% and 150%. The
default setting is 100%.
GainA
With this setting you control the overall gain of the video between 50 and 150%.
Default is 100%.
R-GainA
R-GainA controls the Red gain. The control range is between 50% and 150%. The
default setting is 100%.
G-GainA
G-GainA controls the Green gain. The control range is between 50% and 150%. The
default setting is 100%.
B-GainA
B-GainA controls the Blue gain. The control range is between 50% and 150%. The
default setting is 100%.
BlackA
BlackA controls the total R-G-B Black gain. The range is between –128bit and 127bit.
The default setting is 0bit.
R-BlackA
R-BlackA controls the Red-Black. The control range is between –128bits and 127 bits
in steps of 1 bit. The default setting is 0 bit.
G-BlackA
G-BlackA controls the Green-Black. The control range is between –128bits and 127
bits in steps of 1 bit. The default setting is 0 bit.
B-BlackA
B-BlackA controls the Blue-Black. The control range is between –128bits and 127 bits
in steps of 1 bit. The default setting is 0 bit.
CVBS-Hue
This item adjusts the HUE of the CVBS input. Can be set between -90 and +90
degrees. Default is 0 degrees.
5.9.
Audio Proc Amp
Setting
Description
Audio-Bus-IO
This setting can change the Audio bus order from the normal 1234 (=default) to
1324. The 1324 order is used to route the 1st group of audio from the 2nd input
to the 2nd channel of a slave card (like the DIO48).
INSTALLATION AND OPERATION MANUAL
Synapse GXG100 | 5. Settings Menu |
27
