#Tr_H-ScaleA
The horizontal scaling of the TV picture of channel A in Transparent mode is set
using #Tr_H-scaleA. #Tr_H-scaleA can be set within the range of 50% to 200% of
the input signal (only used when #Tr_ArcA is set to variable). Default value is
100%.
#Tr_V-ScaleA
Sets the vertical scaling of the TV picture of channel A in Transparent mode. Can
be set within the range of 50% to 200% of the input signal (only used when #Up_
ArcA is set to variable). Default value is 100%.
#Tr_H-EnhA
With this item you can set the horizontal picture enhancement of channel A in
Transparent mode between 0 and 100%. By default set to 0%.
5.6.
Inserter
This card can insert several data values in the VBI of the outputs. With the following settings you can
choose what you want to insert.
SMPTE ST 352 Payload Identifier
The SMPTE ST 352 Video Payload Identifier, also known as VPID, is transported within the ancillary data
of an SDI stream. The ancillary packet is placed in the HANC space. This packet contains 4 bytes of
data.
There are two versions of the standard. The first was published in 2011 and the second in 2013. The
revision can be seen within the 4 bytes.
When the GXG100 is not processing the incoming VPID packets, they will be passed transparently. When
it generates the packets, the GXG100 will output VPID packets using the 2013 standard.
Setting
Description
S352_Insert
S352_Insert enables the Video Payload Identifier insertion in the HANC
space. It enables the user to insert or passthrough (On) the S352 Dynamic
range and colorspace payload. When this menu item is set to On (default), it
will generate a SMPTE ST352-2013 packet and overwrite the existing one
(for both Luminance and Chrominance).When it is set to Off, it will pass the
packet to the output as-is (only on Luminance).In HD 1080i for ATC-LTC
transparency, the user may switch it Off to pass the ATC-LTC HANC
packet on line 10.
Output-Matrix
This setting will only work if S352_Insert is set to On. It enables you to set
the colorspace in REC709 (default) or REC2020. When set to either REC709
or REC2020, the S352 data is included in the s352 packet. (This does not
change anything in the picture.)
INSTALLATION AND OPERATION MANUAL
Synapse GXG100 | 5. Settings Menu |
23
