EVS Synapse GDK200 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 56

EVS Synapse GDK200 Скачать руководство пользователя страница 53

GNU Public License

Open-Source Software

This product contains open-source software licensed under the GNU Public License (GPL). A copy of
the GNU Public License can be obtained from

https://www.gnu.org/licenses/old-licenses/gpl-2.0.html

Under this license, you are eligible to receive a copy of the source code of this software, including any
changes.

EVS Broadcast Equipment SA shall provide the source code on request either through physical
distribution or electronic communication. For physical distribution you may be charged a fee that covers
distribution costs. This offer is valid up to three years after date of purchase. Please direct your request
to the support department of EVS Broadcast Equipment SA.

EVS Broadcast Equipment SA supports open-source software by participating in the development of
open-source projects or submitting improvements to these projects. For more information, please visit
https://mi-sftp.evs.com.

INSTALLATION AND OPERATION MANUAL

Synapse GDK200 | GNU Public License |

45

«
...
51
52
53
54
55
...
»

Содержание Synapse GDK200

























































Отзывы:

Нет отзывов