Evolution evotherm EFI Ultra V30T, Инструкция по установке и эксплуатации

Страница: 39 / 48

36
Step 5:
Same as EZ mode above.
Note: If the connection is failed, please enter the AP mode manually and reconnect according to
the above steps.
5.2.4 Software Function Operation

After the device is bound successfully, enter the operation interface of “Smart heat
pump” (Device name, modifiable)

In the main interface of “Smart Life”, click “Smart heat pump” to enter the operation
interface.
①
Back
②
More: You can change device name, select device installation location, check networking
status, add Shared users, create device cluster, view device information, and more.
③
Setting temperature adjustment: The white circle slides counterclockwise to reduce the
temperature, but clockwise to increase the temperature.
④
Target temperature
⑤
Current temperature
⑥
Mode switching: Click to select the mode to be switched.
⑦
ON/OFF
⑧
Timing: Click to add timing off/on time.

Modify device name
Click in the following order to enter device details, and click "Device Name" to rename the
device.