11
www.evolutionbuild.com
9. Using the machine
This is a compact but powerful machine and
should only be used by competent operators
who have read and understood the Instruction
Manual.
This Precision File Sander can be regarded as
a powered file. It should be held with both
hands, one hand holding the handle, the other
hand holding the motor casing.
(fig. 12)
Caution:
A severe abrasion hazard exists
when using this machine. We recommend
that the operator considers wearing suitable
protective gloves especially when sanding
metallic substances.
note:
A Dust Bag (supplied) can be connected
to the machines outlet port when sanding
wood, plastics or paint removal. It should not
be used when sanding metallic materials.
some general guidance:
• Always wear a dust mask and safety
glasses, and any other safety equipment as
necessary.
• Select the sanding belt carefully for the job
in hand.
• Be aware that the sanding belt may ‘travel’
along the workpiece. Hold the machine firmly
and guide it along the workpiece.
• Light downwards pressure is all that is
necessary to achieve best results. There is no
need to press the machine into the workpiece
with any great force.
• Two, three or more passes over the same
track will achieve better results than trying to
remove all of the waste material in one pass.
MaInTenanCe
UK
note:
Any maintenance must be carried
out with the machine switched off and
disconnected from the power supply.
Check that all safety features and guards are
operating correctly on a regular basis. Only
use this machine if all guards/safety features
are fully operational.
All motor bearings in this machine are
lubricated for life. No further lubrication is
required.
Use a clean, slightly damp cloth to clean
the plastic parts of the machine. Do not use
solvents or similar products which could
damage the plastic parts.
WaRnInG:
Do not attempt to clean
by inserting pointed objects through
openings in the machines casings etc. The
machines air vents should be cleaned using
compressed dry air.
Excessive sparking may indicate the
presence of dirt in the motor or worn out
carbon brushes. If this is suspected have the
machine serviced and the brushes replaced
at an authorised service centre.
enVIROnMenTal PROTeCTIOn
UK
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Содержание EVOPFS400
Страница 1: ...Original Instructions Read instructions before operating this tool www evolutionbuild com...
Страница 12: ......