2
3.0
INSTALLATION
3.1
GENERAL
3.1.1
Position the filter as close to the swimming pool/spa as possible.
3.1.2
Position the filter so it is free from flooding, drainage infrastructure and areas where
water may pool, such as ditches, guttering, garden hollows, etc.
3.1.3
Position the filter so that the piping connections, Multiport Valve and winter drain is
convenient and accessible for operation, servicing and winterising.
3.1.4
Ensure that the compliance label is facing the front to allow easy identification.
3.1.5
The filter should be placed on a level concrete slab, very firm ground, or equivalent.
Ensure that the ground will not subside, preventing any strain from the attached
plumbing.
3.1.6
Ensure that there is no movement of the filter during operation of the Multiport Valve.
3.1.7
Allow sufficient clearance around the filter to permit visual inspection of the entire
system.
Fig. 1
Installation diagram.