Evolution EVOBRIGHT SINGLE Скачать руководство пользователя страница 6

4

5.0 

OPERATION & TROUBLESHOOTING

5.1 

Plug the Transformer AC Power Supply (Fig. 2) into a 10A 230-240VAC General Purpose Power 
Outlet (Fig. 4) and switch the power on. The pool lights will turn on when the power is on. 

5.2 

To connect additional Transformers in series (a maximum of 5), plug the slave unit/s into the 
10A AC Outlet on the underside of the Master Transformer. The primary Slave can provide 
power to a secondary Slave up to a maximum of 5 units (Fig. 4). 

5.3 

If there is no power being supplied to the LED lights, ensure power is available to the 
Transformer through the Power Outlet. If power is available, switch off and unplug the 
Transformer from the Power Outlet. First, check any 4A fuses fitted for signs of overload, and 
rectify any electrical overload situation. Secondly, remove the Electrical Terminal Connector 
from the Terminal Socket and ensure Pool Light Power Wires are secure and fitted properly 
into the Connectors. Ensure the Connectors are fitted securely into the Terminal Sockets.

6.0 

GENERAL SAFETY INSTRUCTIONS

 

6.1 

The operating safety of the Evobright Pool Light Transformer is only guaranteed if the 
Installation and Operation Manual is correctly followed.

6.2 

During operation, some parts of the Transformer are subject to dangerous electric voltage. 
Work may only be performed on the Transformer, or on the equipment connected to it, after 
disconnecting from the mains power.

6.3 

If the AC Power Supply Cord is damaged, it must be replaced by Evolution Water & Lighting 
Solutions or an authorised service agent. 

6.4 

Evolution Water & Lighting accepts no liability for damage or injuries caused by unauthorised 
replacement parts. Original replacement parts ensure a high level of safety.

7.0 

WARRANTY

7.1 

Evolution Evobright Pool Light Transformers are covered by a 1-year warranty from the date 
of purchase. Warranty will not be covered without proof of purchase, so keep the original 
purchase invoice in a safe place.

7.2 

Warranty only applies if the equipment is installed and operated in complete compliance 
with the Installation and Operation Manual.

7.3 

Evolution Water & Lighting Solutions will not accept liability for any consequential loss or 
damage of any kind.

For all warranty enquiries, please do not hesitate to call 07 5565 0000  
or email [email protected]

Содержание EVOBRIGHT SINGLE









Отзывы: