DTA Converter
QUICK START GUIDE
Ideas to Solutions for a Digital World
1
Accessories
Inside the DTA Converter box you will find the
equipment listed below:
1. DTA (Digital to Analog) Converter
2. Power Supply
3. AAA Alkaline batteries x 2
4. Audio/Video cable
5. Remote Eye (IR Extender)
6. Remote Control
1
2
3
4
5
6
2
Connect the DTA Converter to Your TV
3
Getting to Know Your Remote
4
Main Menu
FAVORITE & PARENTAL
CONTROL
Create a list of favorite
channels or choose channels
to restrict from viewing.
MAIL BOX
Check the messages sent by
your service provider.
SETTINGS
•
Parental Lock:
Change
your parental password
•
Language Setting:
Set
the display language
•
Other Settings:
Set OSD
Mixweight, Banner Timeout
and Power Option
STATUS, CAS
These sections are for use by authorized
technicians only.
Note:
Your remote may vary slightly from the one pictured here. However, basic functions
should remain the same.
5
Commonly Used Features
DISPLAY THE CHANNEL LIST GUIDE
While watching TV, press
OK
or
GUIDE
on the remote control to display a
channel listing.
•
Press the Up/Down button to
move to different channels.
•
Press the
CH+/CH-
button to move
a page at a time.
•
To view a channel, highlight the channel
using the button and press
OK
.
•
Press the
EXIT
button to return to
watching TV.
MENU OPTIONS
© 2008 Evolution Digital, LLC. All rights reserved.
TV POWER
Turn your TV on or off
INFO
View a description of
the highlighted program
and the next program
FAVORITES
Browse Favorite
channels
ARROWS
Move the highlight
to the next field in a
menu or screen
VOLUME
Audio up & down
RECALL
Display previous
channel
LANG
Display alternative
language feed
SET UP
LED Light, To Program
your remote*
GUIDE
Display Channel List
Guide
MULTI-COLOR
Buttons for future use
MENU
Display the Main Menu
OK
Select a highlighted item
within Menus.
Display Channel Listing.
CHANNELS
Channel up & down
EXIT
Return to watching TV
MUTE
Turn on/off sound
To Place the DTA Converter Out of Sight
1. Connect the remote eye cable into the
IR port on the back of the DTA Converter.
2. Place the round end of the remote eye cable
where your remote control can see it.
3. Place the DTA Converter out of sight.
Set TV and DTA Converter to Channel 4
1. Make sure the channel switch on the back
of the DTA Converter is set to channel 4.
2. Turn your TV on and make sure your TV is
set to channel 4 or TV/Video.
Note:
If your cable company is currently updating your channels you may see an update message on the
screen. It will go away when they are finished updating.
*Please refer to the Remote Control Programming and Operating
Instructions to program your remote to work on your TV.
1
5
GETTING STARTED
Disconnect the coax cable from your TV. Connect the same coax cable from the wall
outlet to the ANT IN port on the back of the DTA Converter . This is the fitting with
a black center.
CABLE CONNECTION
Select either option A or B Connection Instructions.
A.
Connect the DTA Converter to your TV
using the Coax Cable.
Connect one end to the RF OUT on the DTA
Converter. This is the fitting with the white center.
Connect the other end to the input of your TV.
B.
Connect the DTA Converter to your TV
using the Audio/Video cable .
Connect the yellow, red and white wire
connections to the same color coded fittings
on the DTA Converter and your TV.
CONNECTING POWER
Connect the power supply into the wall outlet and the back of the DTA Converter.
TURN ON YOUR TV
The DTA Converter will immediately start to perform a channel software upload.
It will scan for all channels you can receive. This operation could take up to 5 minutes.
DO NOT STOP THIS SCANNING PROCESS.
You will notice the channel menu will start to fill in. When the progress bar gets to
100% you will see a Please Wait screen. When the scanning operation is complete, this
screen will disappear.
Congratulations, you are now ready to receive digital channels on your TV!
To Coaxial Wall Outlet
To TV
VIDEO
L
AUDIO R
4
B
To Coaxial Wall Outlet
CABLE IN
A
2
4