www.evolutionbuild.com
4
www.evolutionbuild.com
5
Ear and eye protection MUST be worn while operating this
equipment. Do NOT touch the blade while it is in motion.
Always follow the Personal Protection Equipment (PPE)
recommendations while operating this tool. This machine
is designed for cutting steel using the appropriate TCT
(Tungsten Carbide Tipped) blades and accessories. It should
NOT be modified and / or used for any application other
than for which it was intended, including powering other
equipment.
Ensure that the total work area can be viewed from the
operating position. Use barriers to keep people 4 metres
away, to avoid possible ejected debris. Do not operate the
tool in explosive environments - power tools create sparks
that may ignite flammable materials or gases. Do not operate
the tool in damp or wet conditions or areas, as electric
shocks may result. Always use both hands to operate the
tool. Always ensure that the material you are working on is
securely clamped.
• This tool is equipped with an approved cord and plug for
its intended Country of use. The green and yellow conductor
in the cord is the grounding wire, never connect this to a
live terminal.
• Remove battery before replacement of the blade, making
adjustments, or other maintenance work.
• Use only genuine EVOLUTION brand saw blades.
• Inspect the machine and blade before each use and do not
use deformed, cracked, worn or otherwise damaged blades.
• Ensure the blade is correctly mounted and is appropriate
for the material to be cut.
• Do not use blades made of high-speed steel.
• Do not use blades that do not comply with the characteristics
specified in these instructions.
• Do not stop the blade by lateral pressure on the disc.
• When cutting wood, suitable dust extraction and breathing
apparatus must be used, and the chip collection compartment
MUST be emptied before cutting other materials.
• Ensure that moveable guards operate freely without jamming.
• Never use the tool without the original protection guard
system. Do not lock the moving guard in the open position.
• When you put the tool away, switch off and ensure that all
moving parts have come to a complete standstill.
• In case of jamming, immediately switch off the tool and
disconnect the battery.
• Before using accessories, always compare the maximum
allowed RPM of the accessory with the RPM of the tool.
• Ensure that the cutting depth adjustment handle, and angle
adjustment handle, are firmly fixed while using the tool.
• Only use the flanges and washers that are supplied
with the tool, and replace them if they become damaged
or scored.
Use only the supplied Evolution OUTRAGE battery charger.
Only these battery chargers are matched to the lithium ion
battery of your power tool.
Note:
The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in your
battery charger before using your power tool for the first time.
1.
Plug the charger in with no battery inserted; 2nd light
shows steady red.
2.
Slide battery down on to charger; 1st light shows steady
dim red, 2nd light shows steady red. Fan starts running.
3.
Battery lights on; 1st Battery light flashes green to indicate
charging has commenced.
4.
In the charging process each of the battery lights will flash
green, the battery is fully charged when the 4th battery light
is flashing green and the charger shows 1st light steady
green, 2nd light steady red.
5.
If the battery is left plugged in to the charger beyond this
stage the battery lights will go off and the charger lights will
remain 1st light steady green, 2nd light steady red.
Note:
Battery can be removed from the charger and another
battery can be inserted, without switching off the charger.
OPERATING INSTRUCTIONS
BATTERY CHARGING
BATTERY CHARGER
1ST LIGHT
2ND LIGHT
BATTERY LIGHTS
