Evolis badgy 100 Скачать руководство пользователя

Страница: 27 / 37

4-3 TROUBLESHOOTING

Do not attempt to use tools or other items to repair your printer in the event of problems. You risk causing irreparable damage.

4-3a Printing Problems

Printing won't launch

Check the driver

Check that there is a driver for your printer in the system parameters.
Check that the printer is selected as the default printer.

Check the printer's power supply

Check that the power cable is correctly connected to the printer and to a working electrical socket.
Check that the printer is on and that the control button is lit.
Make sure you are using the power supply unit supplied with the printer.

Check the USB cable

Check that the printer is connected to your computer via the USB cable.

Check the ribbon

Check that the ribbon is fitted correctly and that the cover is closed.

Check the cards

Check that there are cards in the card feeder.
Check that no cards are jammed in the printer.

Print a test card

See elsewhere in this section for the procedure to be followed.

Nothing is printed on the card

Check the ribbon

Check that the ribbon is not finished or damaged. Replace it or re-install it if necessary.

The print head may be damaged

Print a test card.
If the test card does not print, contact Badgy technical support or visit the website

www.badgy.com.

Содержание badgy 100





































Результаты поиска

Содержание badgy 100

Отзывы:

Похожие инструкции для badgy 100

Бренды по названию

Популярные бренды

Evolis badgy 100, Руководство пользователя

Результаты поиска

Содержание badgy 100

Отзывы:

Похожие инструкции для badgy 100

Бренды по названию

Популярные бренды