9
EvoHeat CS-i Commercial Inverter Series Heat Pump
5. Operation
Scan the QR Code or head to our YouTube channel for step by step videos.
https://www.youtube.com/evoheat
5.1 Main Controller Interface
Number Name
Button Function
1
ON/OFF
Press to turn the unit on or off.
2
Parameter
Press to view the unit state and the parameter.
3
CLOCK
Press to set the clock, the timer on or off. When the timer is in use, the
button will be green.
4
Fault Display
Click to view fault history.
5
Silent Setting
Click to turn on/off the silent function and to set timing Low speed function.
6
MODE
Click to enter mode setting and the target temperature interface.
7
Temperature Curve
Click to view the temperature and power curve.
8
Water Inlet
Temperature
Press to enter mode setting and the target temperature interface.
9
LOCK
Click to lock the screen. To unlock, press this button again and enter the
code “22”.
5.2 Functions of the Controller
5.2.1 Start-up & Shut-Down
To turn the unit on or off, press the power button symbol (1).
5.2.2 Switching Modes & Setting the Target Temperature
In the main interface, click the mode (6) button or inlet water
temperature setting button (8) to get the following menu:
Choose from the modes: refrigeration mode (1), automatic mode
(2) or heating mode (3).
Note: When the unit is designed for single automatic mode or single
thermal mode, the mode cannot be switched.
From this screen, pressing the temperature (4) will allow you to
adjust it as desired.
