Product Introduction
W15 SERIES
· 5 ·
Power feature
Input voltage/frequency: 220VAC/50Hz (with
adapter)
Input voltage/frequency: 9VDC-36VDC (no
adapter, direct input to the PC)
Power consumption of the PC:
23.35
W (standby
status);Power consumption of the PC:
41.95
W
(operating
3D MARK
100%)
1.3 Operating Instructions
1.3.1 External Functions
Front View of the PC
Location
Description
Location
Description
Location
Description
1
Power
indicator
2 HDD
indicator
3
Increase
luminance
4
Decrease
luminance
5 Display
switch
Note:(1) When the display switch is used to switch on/off the display screen, the
touch screen function will be enabled/disabled. After it is enabled, the touch screen
controller will reestablish communication with the CPU and load the driver. Therefore,
it is suggested that the interval for the screen switch on/off should not be less than 30
seconds, to ensure that the touch screen controller can load the driver correctly and
avoid the touch screen failure.
(2) To adjust the brightness of the display, you need to long press the button to
increase/decrease the brightness, and short/quick clicking is invalid.
