PC Maintenance
MEC-5031-M SERIES
· 67 ·
9. PC Maintenance
9.1
Installation of Hardware Assembly
9
aintained or repaired by authorized personnel.
Removal/
.1.1 Carry out Maintenance
The PC can only be m
Warning
Unauthorized operation or repair for the PC may cause damage to the PC or
endanger safety of users.
Disconnect the PC from power source before opening the PC.
Only the system expansion devices designed for the PC can be installed. If other
expansion d
PC may be damaged or safety requirements and
re
ati
suppression may be breached. Please contact
technic
al distributor, to know the system expansion devices tha
can be s
stalled.
If the product is damaged due to installation or replacement of system expansion
device, the warranty will become invalid.
Responsibility Range
Our co
ponsible for functional damage caused by use of
third-pa
ly.
9.1.2 P
tive Maintenance
To maintain relatively high system availability, it is recommended to preventatively
replace the quick-wear parts. The table below give the time interval for replacem t:
evices are installed, the
ons related to radio frequency
al support team or loc
afely in
gul
t
mpany shall not be held res
rty device or assemb
reventa
en
Assembly
Time Interval for Replacement
HDD 3
years
CMOS backup battery
5 years
Содержание MEC-5031-M Series
