EVOC LNB-1406, Руководство пользователя

Страница: 104 / 148

Chapter 3 Installation
- 24 - JNB-1406
Install the USIM/UIM Card
1. Insert the USIM or UIM card into
the card slot with the metal contact
side facing down and the gap inward,
as shown in Figure-19.
2. After that, power on the computer.
Users may use the hot key “Fn+F2”
on keyboard to enable the 3G module
and operate the user software
provided by the mobile network
operator. You may use the WWAN
after it prompts successful
registration.
Before inserting or removing the USIM or UIM card, please power off the computer
and disconnect the adapter first; otherwise, the 3G module will be damaged or unable
to operate normally. The correct operation is as follows: Insert the USIM or UIM
card into the card slot with the metal contact side facing down and the gap inward;
push inward until it clicks, which indicates that the card has been installed properly.
When removing the card, gently push the USIM or UIM card forward until it clicks
to pop out, and then take out the USIM or UIM card.