EVOC IPC-820, Руководство пользователя

Страница: 63 / 69

Assembly and Maintenance
IPC-820 - 25 -
6.5 Installation and Removal of the Fan
4
3
1
2
Figure 1 Figure 2
Item Description Item Description Item Description
1 Fan 2 Manual screw 3 Fan bracket
4
Countersunk
head self-tapping
screw ST4.8*1
0
Installing the fan:
1. As shown in Figure 1, use four self-tapping screws to fix the fan onto the fan
bracket (please pay attention to the direction);
2. Install the assembled fan module in the chassis (as per Figure 2), and tighten the
manual screw.
Removing the fan
1. Open the chassis cover, loosen the manual screw and take the fan module out of the
chassis;
2. Use a tool to loosen the four self-tapping screws, and separate the fan from the
bracket.