EVOC IPC-820, Руководство пользователя

Страница: 60 / 69

Assembly and Maintenance
- 22 - IPC-820
Removing FSC(EPI) motherboards:
1. Loosen the countersunk head screws on the chassis cover, the remove the cover;
2. Loosen the four cup head M4*6 screws with external teeth lock washers fixing the
two binding strips, and remove them;
3. Loosen the two M3*6 screws fixing the motherboard, then you can pull out the
motherboard from the carrier board.
6.3 Installation and Removal of Drives
6.3.1 Installation and Removal of Optical Drive
2
1
3
(Figure 1) (Figure 2)
Item Description Item Description Item Description
1 Optical drive 2
Butt-weld assembly
of optical drive
3 Screw X6
This chassis can be configured with one optical drive. Use 8PCS M3×6 pan head
screws to fasten the optical drive on the butt-weld assembly (Figure 1), then fix them
in the chassis (Figure 2).